What Is That Standard Lug Nut Size For Subarus?
The standard lug nut size for Subarus depends on the year and model of your vehicle. It is important to understand the specific lug nut size for your Subaru, as using the wrong size can cause damage to both the wheel and axle. This article will explain what the standard lug nut size is for various models of Subarus, so you can ensure you get the right size for your car.
Are all Subaru lug nuts the same?
Although this isn't unique to Subaru, all cars should have their wheel lug nuts torqued. Where Subaru differs is the 1.25 thread pitch. If an equal torque is applied to a 1.25 and 1.5 pitch fastener, the former will be more secure due to the higher clamping force that results from its tighter grip.
It is also important to note that certain Subaru models have a locking lug nut, which requires a special key for removal. This helps to prevent theft or tampering of the wheel.
Does Subaru use metric or standard bolts?
Subaru uses a mix of standard and metric bolts when it comes to their lug nuts. Generally speaking, most Subaru models will have either 14mm or 17mm lug nuts. Certain Subarus may require an additional adapter to fit the lug nut correctly.
What is difference between metric and standard?
Keep in mind that "standard" fasteners usually refer to those measured in inches, made primaries in the United States. Metric-system fasteners are, as you might have guessed, units based on the metric system (millimeters, etc.). Although most American-made fasteners used to be inch-based, that is changing now as more U.S.-produced items begin using the metric system.
Can I use a standard socket on a metric bolt?
You can use some sockets on both metric and SAE sizes, but you need to be careful, as most times they are not exactly the same. You can strip a bolt by using an SAE socket on a metric bolt or vice versa.
What is the standard lug nut size for Subarus?
The standard lug nut size for Subarus is generally 14mm or 17mm, depending on the model and year of your car. Some older models may require an adapter for the lug nut to fit correctly, so it's always good to check with your local auto shop or dealership before attempting to replace a wheel on a Subaru.
It is also important to make sure you get the right size lug nut for your Subaru, as using the wrong size can cause damage to both the wheel and axle.
Conclusion
As you can see, the standard lug nut size for Subarus varies depending on the model and year of your car. Generally speaking, most Subaru models will require a 14mm or 17mm lug nut. Be sure to check with your local auto shop or dealership before attempting to replace a wheel on a Subaru, as some older models may require an adapter for the lug nut to fit correctly. Additionally, some Subarus may feature a locking lug nut, which requires a special key for removal.
Now that you know more about what the standard lug nut size is for various models of Subarus, you can ensure your car gets the right size fasteners and stays safe on the road!
